2020 Huawei H12-322 Dumps |Huawei H12-322 Study Material | Dumpspass4sure.com

Sample Questions:-

Question: 1

Which of the following two scenarios involves a high-density deployment?

A. Mobile office
B. Education Park
C. Wireless medical care
D. Venue coverage

Answer: B,D



Question: 2

The following description of the WLAN outdoor AP is wrong?

A. AP8030DN cannot be connected to an external antenna.
B. AP6610DN supports PoE power supply
C. AP8130DN has 4 RF ports
D. AP6510DN supports 11a/b/g/n/ac protocol

Answer: B,C,D



Question: 3

What are the precautions in using the WLAN Survery PAD survey tool for pre-sales network planning?

A. There must be a survey of the construction environment and know the corresponding scale
B. Label the obstacle information as detailed as possible, keeping it consistent with the actual environment.
C. The customer's needs must be clear, and the actual number of people needs to consider the concurrency rate according to the actual situation.
D. For some unclear information, the surveyor is required to estimate relevant information for surveying.

Answer: A,B,C



Question: 4

When using a fat AP and a terminal to test the attenuation of an obstacle, it is best to bring the signal source close to the wireless terminal and the obstacle so that the test data is accurate.

A. True
B. False

Answer: B



Question: 5

In the outdoor bridge backhaul scenario, you can use the Pad Survey tool to add a pin on Google Earth to mark the points of convergence, relay, and leaves.
Bit, add a path to represent the bridge path, right click on the path, display the height profile to view
the elevation of the path, so that Confirm the wireless path line of sight.

A. True
B. False

Answer: A

For More Info:-

Visit Now:-

https://www.dumpspass4sure.com/huawei/h12-322-dumps.html

Read More

Cisco 500-460 Dumps Master Piece PDF | Exam Questions | Valid Study Material

Sample Question

Question # 1

Which Cisco CMX application is used to gain valuable demographic information about guests?

A. CMX Analytics
B. CMX for facebook
C. CMX Connect
D. CMX Engage

Answer : B



Question # 2

Which four options are important components in the cisco CMX and location-based services topology? (choose four)

A. Identity Services Engine
B. CAPWAP Access Points
C. Mobility Services Engine
D. Wireless LAN Controllers
E. Prime Infrastructure
F. Application Control Engine

Answer : B,C,D,E



Question # 3

On which two areas are cisco Enterprise Mobility Solutions focused? (Choose two)

A. business-to-business
B. business-to-employee
C. business-to-consumer
D. business-to-enterprise

Answer : B,C

For More Info:

Visit Now:

https://www.dumpspass4sure.com/cisco/500-460-dumps.html

Read More

Latest Cisco 500-230 Questions Answers 2020 | Valid 500-230 Dumps

Sample Question:-

Question: 1

What is the default MP-BGP address-family on IOS-XR?

A. IPv6 unicast
B. There is no default address-family
C. IPv4 unicast
D. VPNv4

Answer: D



Question: 2

Which command removes a user from configuration mode but keeps the user connected to the router?

A. clear line
B. clear session
C. clear commit
D. clear config session

Answer: D



Question: 3

Which command is used to configure an interface that does not currently exist in the system?

A. interface preconfigure
B. preconfigure interface
C. interface vrf preconfig
D. controller preconfigure

Answer: A



Question: 4

What is the TRACE command?

A. A packet tracer showing the path of a packet from ingress to egress in the router.
B. The replacement for TraceRoute in IOS-XR.
C. A form of always-on debugging available for a subset of commands.
D. Exactly the same as the debug command, must be explicitly turned on.

Answer: C

For More Information:-

Visit Now:-

https://www.dumpspass4sure.com/cisco/500-230-dumps.html

Read More

Latest Cisco 500-210 Dumps,Verified Study Material 2020 Dumpspass4sure.com

Sample Question:-

Question: 1

Which card is the NCS 2000 Optical Service Channel built into?

A. Transport Shelf Controller
B. Transport System Controller
C. Transport Node Controller
D. External Connection Unit

Answer: C



Question: 2

How many slots does NCS 2006 have?

A. 6
B. 8
C. 10
D. 7

Answer: B



Question: 3

Which document is designed to be a problem-solving aid?

A. NCS 2000 Reference Guide
B. NCS 2000 Troubleshooting Guide
C. NCS 2000 Procedure Guide
D. NCS 2000 TL1 Reference

Answer: B



Question: 4

Which document do you refer to for information about procedures (release 10.0 and later)?

A. Getting Started Guide
B. Reference Guide
C. Configuration Guide
D. Upgrade Guide

Answer: C



Question: 5

Which two methods can be used to start Cisco Transport Controller? (Choose two.)

A. web browser
B. Telnet
C. StartCTC application
D. FTP

Answer: A,C

For More Info:-

https://www.dumpspass4sure.com/cisco/500-210-dumps.html

Read More

Cisco 352-011 Dumps | PDF Key To Success | {2020}

Sample Question:-

Question: 1

The cloud service provider CSP is planning to launch five data centers in Egypt, United Arab Emirates,Saudi Arabia, Qatar and Turkey. CSP is looking for VLAN extension and DCIs between these five data centers to allow for software replication, where original and backup VMs must be on the same subnet.
Which tunneling technology must they use?

A. VPLS
B. IPsec VPN
C. VPWS
D. L2TPv3

Answer: A



Question: 2

As part of network design, two geographically separated data centers must be interconnected using Ethernet-over-MPLS pseudowire. The link between the sites is stable, the topology has no apparent loops, and the root bridges for the respective VLANs are stable and unchanging. Which aspect must be the part of the design to mitigate the risk of connectivity issues between the data centers?

A. Enable 802.1d on one data center, and 802.1w on the other.
B. Ensure that the spanning tree diameter for one or more VLANs is not too large.
C. Enable UDLD on the link between the data centers.
D. Enable root guard on the link between the data centers.

Answer: B



Question: 3

Which load balancing option for IP-only traffic is the least efficient in terms of EtherChannel physical links utilization?

A. On a per source IP address basis
B. On a per destination MAC address basis
C. On a per destination IP address basis
D. On a per port number basis

Answer: B



Question: 4

A service provider wants to use a controller to automate the provisioning of service function chaining.
Which two overlay technologies can be used with EVPN MP-BGP to create the service chains in the data center?

A. VXLAN
B. MPLS L2VPN
C. Provider Backbone Bridging EVPN
D. 802.1Q

Answer: A



Question: 5

Company ABC is using an Ethernet virtual circuit as its provider’s DCI solution. A goal is to reduce the time to detect the link failure. Which protocol accomplishes this goal?

A. UDLD
B. Spanning tree bridge assurance
C. Link aggregation group
D. Ethernet OAM

Answer: D

For More Information:-

Visit Now:-

https://www.dumpspass4sure.com/cisco/352-011-dumps.html

Read More

SAP E_S4HCON2019 Dumps | PDF Key To Success | {2020}

Sample Questions:-

Question: 1

You want to use the Custom Code Migration Worklist via Remote Code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database?
Please choose the correct answer.
Response:

A. Configure it within transaction ATC
B. Apply the corresponding SAP note via SAP Note Assistant
C. Download it from SAP Support Portal
D. Generate it by analyzing the specific custom code via RFC

Answer: C



Question: 2

What is the benefit of using the file UPGANA.XML from a previous SUM run?
Please choose the correct answer.
Response:

A. To make the progress information within SUM UI more accurate
B. To auto-fill specific fields on selected screens on the SUM UI
C. To skip selected phases during the SUM run
D. To repeat specific phases during the SUM run

Answer: A



Question: 3

Which steps should be performed during the adjustment of dictionary objects (SPDD) in the
development system, before SUM continues?
There are 2 correct answers to this question.
Response:

A. Release the transport request containing the modification adjustment
B. Assign the transport request as a modification adjustment transport
C. Create "modified' versions of the objects that you need to adjust
D. Manually activate the adjusted dictionary objects

Answer: B,C



Question: 4

What do you need to know about the SAP ERP Upgrade and Update Guide?
There are 2 correct answers to this question.
Response:

A. It contains a section "free space requirements"
B. It is target release specific
C. It is a database-specific document
D. It contains a troubleshooting section

Answer: A,B



Question: 5

Which Guides contain information about SUM phases starting with "EU_CLONE_"?
There are 2 correct answers to this question.
Response:

A. The SAP S/HANA Conversion Guide
B. The Application Guide
C. The major SUM Guide
D. The DMO Guide

Answer: A,D

Read More

2020 SAP C_TS451_1809 Dumps |SAP C_TS451_1809 Study Material | Dumpspass4sure.com

Sample Questions

Question: 1

Which of the following is an endto--end solution in Streamlined Procure to Pay? Please choose the
correct answer.

A. Operational Procurement
B. Invoice Processing.
C. Purchase Order Processing
D. Supplier Evaluation

Answer: A



Question: 2

Which of the following are business partner categories in SAP S/4HANA? There are 3 correct answers to this question.

A. Group.
B. Customer
C. Supplier
D. Person
E. Organization

Answer: A,D,E



Question: 3

To which organizational level can you assign a plant in SAP Materials Management? Please choose the correct answer.

A. Company code
B. Controlling area
C. Purchasing group.
D. Business area

Answer: A



Question: 4

What is needed to verify that a landing page which is blacklisting an email channel for a profile, is
working?

A. A test profile subscribed to a service
B. A test profile
C. A profile
D. A blacklisted profile

Answer: A,C



Question: 5

Where do posting with automatic account determination occur in SAP Materials Management? Please choose the correct answer

A. Inventory management
B. Invoice verification
C. Requisition creation.
D. Material requirements planning
E. Material valuation

Answer: E

Read More